Solvente dielétrico universal para limpeza de equipamento elétrico, eletrónico e mecânico

MILCIM S - Universal dielectric solvent for cleaning electrical, electronic and mechanical equipment

€103,84 c/ IVA
Check our Shipments here

Recommended product for degreasing electrical and electronic equipment (switchgear, motors, generators, disconnected transformers, printed circuits, electronic components, etc.) and precision equipment.

EXEMPT FROM WASTE - After evaporation.
DOES NOT DAMAGE - Metals, paints, plastic material or varnishes.
IDEAL EVAPORATION SPEED - Does not cause moisture condensation due to the cooling of the surfaces with which it comes into contact.
EXEMPT - carbon tetrachloride.
DIELECTRIC RIGIDITY - Can be used for cleaning electrical equipment under load, with alternating or continuous current up to 220 V.

Application mode: MILCIM S must be used at room temperature without dilution. Its application can be by spray, brush or immersion. After degreasing the equipment, let it dry by evaporation or to speed up this operation, apply a jet of dry air.

Presentation: 20lt metal packaging with 19kg of product

Danger
Aquatic Chronic 2: H411 - Toxic to aquatic life with long lasting effects
Asp. Tox. 1: H304 - May be fatal if swallowed and enters airways
Carc. 2: H351 - Suspected of causing cancer
Flam. Liq. 3: H226 - Flammable liquid and vapor
Skin Irrit. 2: H315 - Causes skin irritation
Skin Sens. 1B: H317 - May cause an allergic skin reaction
STOT SE 3: H336 - May cause drowsiness or dizziness

For safe use, consult the safety data sheet in advance

For environmental and safety issues of our customers, CIMAI does not provide the technical data sheets and safety data sheets on paper, and all this documentation is available in PDF online on our website, and can even be downloaded.
Please consult the documents for proper and safe use (Technical data and Safety data sheet).

Datasheet


Security record


Delivery time - up to 48 hours for products without ADR (products that are not part of the European Treaty on dangerous goods) and up to 78 hours for products with ADR.

ADR products have a higher level of danger, which means that they have to be transported in special vehicles that must also be driven by properly trained drivers and with a specific license. These transports are rarer than the standard ones and deliveries are usually longer, as there are incompatible products between them, which cannot therefore be transported together.

Shipping costs depend on the weight and/or volume of your order. Please refer to the tables below.