CIM DEFOAM SI - Aqueous silicone based anti-foam emulsion

CIM DEFOAM SI - Aqueous silicone based anti-foam emulsion

€75,28 c/ IVA
Check our Shipments here

CIM DEFOAM SI is an emulsion defoamer. Unlike traditional defoaming agents, the active ingredient of CIM DEFOAM SI guarantees excellent performance over a wide high pH when used at high temperatures of 60 - 80 ° C and with average alkalinity.

CIM DEFOAM SI can be used for foam control at low dosages in the following fields of application: textiles, tanneries, washing in chemical industries, effluent treatment, printing ink, etc.

Application mode: it is a ready-to-use emulsion, with no pre-dilution required
Presentation: plastic packaging with 20kg of product

 

For environmental and safety issues of our customers, CIMAI does not provide the technical data sheets and safety data sheets on paper, and all this documentation is available in PDF online on our website, and can even be downloaded.
Please consult the documents for proper and safe use (Technical data and Safety data sheet).

Datasheet


Security record


Delivery time - up to 48 hours for products without ADR (products that are not part of the European Treaty on dangerous goods) and up to 78 hours for products with ADR.

ADR products have a higher level of danger, which means that they have to be transported in special vehicles that must also be driven by properly trained drivers and with a specific license. These transports are rarer than the standard ones and deliveries are usually longer, as there are incompatible products between them, which cannot therefore be transported together.

Shipping costs depend on the weight and/or volume of your order. Please refer to the tables below.

Translating it ...
Sending ...