Glutaraldehyde and quaternary ammonium based disinfectant - 20lt - CIM SUPERSEPT

Glutaraldehyde and quaternary ammonium based disinfectant - 20lt - CIM SUPERSEPT

€135,48 c/ IVA
Check our Shipments here

EXCLUSIVE PRODUCT FOR PROFESSIONAL USE.

CIM SUPERSEPT is a highly effective, FAST-ACTING biocide.

This product was specially developed for disinfecting all types of surfaces, such as walls, floors and others. The surfactants in its composition give it a high wetting and penetrating power, which makes it effective even on porous or rough surfaces.

Glutaraldehyde is one of the few chemical agents capable of killing spores, with a broad spectrum and fast-acting mechanisms, also known as a “chemical sterilizer”. It can destroy all kinds of microorganisms (including sporulated bacteria and fungi, tuberculosis bacillus and viruses), it is considered the best cold disinfectant.

However, given the risks it presents, both for the user and for the environment, it should only be used in the recommended dilutions, it can only be used by professionals, who must use all the PPE defined in the SDS. The application in closed places should only be carried out if they are well ventilated.

The biocides incorporated in the CIM SUPERSEPT, ELIMINATE SEVERAL MICROORGANISMS SUCH AS BACTERIA GRAM (+), GRAM (-), VIRUSES, SPORES, FUNGI AND MYCOPLASMAS, namely:

Virus: Coronavirus, Influenza A and B Virus, Rhinovirus, Adenovirus, Hepatitis A and B Virus, Norovirus, Enterovirus, Rotavirus.

Bacteria: Gram negative / Gram positive bacteria , Mycobacterium, Bacillus spores, Listeria monocytogenes.

Protozoa: Acanthamoeba polyphaga (trophozoites), Cryptosporidium parvum.

Fungi: Aspergillus niger, Penicillium glaucum, Candida albicans, Trichophyton mentagrophytes, Microsporum canis, Cladosporium cladosporoides, Penicillium verrucosum, Aspergillus versicolo.

Application method:  Dosage: 5 to 20% maximum; to obtain solutions with 0.5 to 2% glutaraldehyde.

Application: This product must be applied by immersion, or with a mop, on previously washed and degreased surfaces, in order to optimize its performance, although the efficiency of the product is not substantially compromised by the presence of protein contamination. IT MUST NOT BE MISTAKED.

After applying CIM SUPERSEPT, let it act for at least 10 minutes and then rinse with plenty of water .

CIM SUPERSEPT should be applied in areas with good ventilation. In closed spaces, after application of the product, the space must be ventilated and wait at least 20 minutes before re-entering it.

Presentation: 20lt plastic jerrican with 20kg of product.

Hazard statements: Aquatic Chronic 3: H412 - Harmful to aquatic life with long lasting effects. Flam. net 3: H226 - Flammable liquid and vapour. ans. Sens. 1: H334 - May cause allergy or asthma symptoms or breathing difficulties when inhaled. Skin Corr. 1B: H314 - Causes severe skin burns and eye damage. Skin Sens. 1A: H317 - May cause an allergic skin reaction. STOT SE 3: H335 - May cause respiratory irritation.

Precautionary statements: P210: Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. P280: Wear protective gloves/face protection/protective clothing/respiratory protection/protective footwear. P301+P330+P331: IF SWALLOWED: Rinse mouth. DO NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or take a shower. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. If you wear contact lenses, remove them if possible. Keep rinsing. P370+P378: In case of fire: Use ABC powder extinguisher to extinguish.

For environmental and safety issues of our customers, CIMAI does not provide the technical data sheets and safety data sheets on paper, and all this documentation is available in PDF online on our website, and can even be downloaded.
Please consult the documents for proper and safe use (Technical data and Safety data sheet).

Technical Data Sheet


Safety Data Sheet


Delivery time - up to 48 hours for products without ADR (products that are not part of the European Treaty on dangerous goods) and up to 78 hours for products with ADR.

ADR products have a higher level of danger, which means that they have to be transported in special vehicles that must also be driven by properly trained drivers and with a specific license. These transports are rarer than the standard ones and deliveries are usually longer, as there are incompatible products between them, which cannot therefore be transported together.

Shipping costs depend on the weight and/or volume of your order. Please refer to the tables below.

Translating it ...
Sending ...