Cleaning, degreasing, deoxidation of aluminum, iron and its alloy surfaces in the metallurgical, civil construction and automobile industries.
HIGH DEGREASING ACTION - removes rust, verdigris, oil from iron, copper, aluminum and their alloys.
GREAT - phosphating action on iron metals.
IS NOT FLAMMABLE - Does not emit toxic vapors, as it is an aqueous solution and non-volatile materials.
MISCIBLE - with water in all proportions.
Application mode: Apply manually with brush, brush or by immersion method, with little agitation. For certain tasks, low oxidized materials, removing oils, FOSFOCIM can be diluted up to 5 parts of water. For deoxidation of parts, with excess oil or greases, degrease previously with CIM 50 SU. Apply FOSFOCIM in the appropriate dilution and let it act until the oxides to be removed dissolve. Before applying another protective coating, LACACIM or paint, wash with water and dry. When used by immersion, the bath must not be heated, the container must remain covered and the time of use should not exceed one week, otherwise the composition of the production will change.
Skin Corr. 1: H314 - Causes severe skin burns and eye damage
For safe use, consult the safety data sheet in advance
Please consult the documents for proper and safe use (Technical data and Safety data sheet).
ADR products have a higher level of danger, which means that they have to be transported in special vehicles that must also be driven by properly trained drivers and with a specific license. These transports are rarer than the standard ones and deliveries are usually longer, as there are incompatible products between them, which cannot therefore be transported together.
Shipping costs depend on the weight and/or volume of your order. Please refer to the tables below.