FERCIM - Deoxidizer and degreaser
Used throughout the metalworking, automobile, civil construction, shipbuilding, etc. industries for cleaning and deoxidizing metal surfaces made of iron, aluminum, brass, bronze and their alloys.
QUICK REMOVAL: Effective of oxides and verdigris from metal surfaces.
DEGREASER: With excellent action, removing excess oils or greases from the surfaces to be deoxidized.
MISCIBLE WITH WATER: In all proportions.
ECONOMIC: High concentration and can be diluted up to 5 parts of water.
IN ONE OPERATION: Deoxides and degreases, leaving the surface prepared, when necessary for further treatment, painting or other protection.
Application mode: Applies by dipping, spraying or brush. In light oxidations, dilute up to 5 parts of water. In metals such as copper or brass use 1:10 parts of water. In highly oxidized iron, it will have to be used pure. Apply FERCIM, let it act until the oxides dissolve, rinse with water and dry. It is recommended as a protection for iron or steel, CONVERCIM (passive and rust converter), or the LACACIM anticorrosive.
Danger
Met. Corr. 1: H290 - May be corrosive to metals
Skin Corr. 1: H314 - Causes severe skin burns and eye damage
STOT SE 3: H335 - May cause respiratory irritation
For safe use, consult the safety data sheet in advance
Please consult the documents for proper and safe use (Technical data and Safety data sheet).
ADR products have a higher level of danger, which means that they have to be transported in special vehicles that must also be driven by properly trained drivers and with a specific license. These transports are rarer than the standard ones and deliveries are usually longer, as there are incompatible products between them, which cannot therefore be transported together.
Shipping costs depend on the weight and/or volume of your order. Please refer to the tables below.
Related Products
CIMAI
