desincrustante químico baixa espuma concentrado

DESCALCIM LF - Chemical descaler

€113,56 c/ IVA
Check our Shipments here

REMOVE - Easily incrustations of carbonates, silicates, sulfates, iron oxides etc.
MISCIVEL - With water in all proportions.
DOES NOT ATTACK - Plastics.

CONTAINS CORROSION INHIBITORS - So that the acid descaling operation does not attack metal surfaces.
EXEMPT - Foam.
EASY REMOVAL - By rinsing.

Application mode: Use pure or diluted up to 4 parts of water, let it circulate for 1 to 6 hours, until all the incrustations are removed. Rinse with plenty of water.

  • Presentation: 20lt plastic jerrican with 22kg of product.

    •  

    Danger
    Met. Corr. 1: H290 - May be corrosive to metals
    Skin Corr. 1: H314 - Causes severe skin burns and eye damage
    STOT SE 3: H335 - May cause respiratory irritation

    EUH032: Contact with acids liberates very toxic gases

    For safe use, consult the safety data sheet in advance

    For environmental and safety issues of our customers, CIMAI does not provide the technical data sheets and safety data sheets on paper, and all this documentation is available in PDF online on our website, and can even be downloaded.
    Please consult the documents for proper and safe use (Technical data and Safety data sheet).

    Datasheet


    Security record


    Delivery time - up to 48 hours for products without ADR (products that are not part of the European Treaty on dangerous goods) and up to 78 hours for products with ADR.

    ADR products have a higher level of danger, which means that they have to be transported in special vehicles that must also be driven by properly trained drivers and with a specific license. These transports are rarer than the standard ones and deliveries are usually longer, as there are incompatible products between them, which cannot therefore be transported together.

    Shipping costs depend on the weight and/or volume of your order. Please refer to the tables below.

    Translating it ...
    Sending ...