CIM 60 - Alkaline descaler
Hot or cold removal of carbonaceous incrustations, burnt oils, fats, carbon black, salts, etc., in machinery and equipment, and any surface of iron, stainless steel or plastic.
Excellent for cleaning grills and filters for hoods and kitchens in restaurants or hotels. When used concentrated or slightly diluted, in aluminum and its alloys, the immersion time must be controlled; this must be the minimum necessary for total cleaning of the parts.
Dosage: Use pure or diluted, up to 10 parts of water, using a brush, mop, spray or immersion. When used by immersion in a hot bath (60 to 80ºC), better results are obtained. Dip the pieces for 30 to 90 min., Depending on the type of surface and the nature of scale to remove.
Presentation: Plastic packaging of 20lt with 24kg.
Danger
Met. Corr. 1: H290 - May be corrosive to metals
Skin Corr. 1: H314 - Causes severe skin burns and eye damage
For safe use, consult the safety data sheet in advance
Please consult the documents for proper and safe use (Technical data and Safety data sheet).
ADR products have a higher level of danger, which means that they have to be transported in special vehicles that must also be driven by properly trained drivers and with a specific license. These transports are rarer than the standard ones and deliveries are usually longer, as there are incompatible products between them, which cannot therefore be transported together.
Shipping costs depend on the weight and/or volume of your order. Please refer to the tables below.
Related Products
CIMAI
