CIM ANTIGRAF L is a graffiti stripper for removing all types of graffiti, from plastics, metals, painted surfaces, also from brick, stone and concrete.
Biodegradable product, however, must not be poured into water lines or land.
Application mode: Apply with a long, clean, dry brush to the surface to be cleaned in a circular motion so as to spread about 200 ml / m2 of CIM ANTIGRAF L. After 5 minutes remove with water pressure to about 90 bar hot or cold. In the case of porous surfaces hot water should be used. On graffiti that is more difficult to remove, apply the ANTIGRAF CIM with a brush, and then apply the sprayed CIM ANTIGRAF L, allowing to act for about 10 min. And remove with a pressurized water jet 90 - 120 bar of hot or cold water.
Presentation: 20lt plastic jerrican with 20kg of product
Danger
Eye Irrit. 2: H319 - Causes serious eye irritation
Flam. Liq. 3: H226 - Flammable liquid and vapor
Repr. 1B: H360D - It can affect the unborn child.
Skin Irrit. 2: H315 - Causes skin irritation
STOT SE 3: H336 - May cause drowsiness or dizziness
STOT SE 3: H335 - May cause respiratory irritation
Restricted to professional users
For safe use, consult the safety data sheet in advance
Please consult the documents for proper and safe use (Technical data and Safety data sheet).
ADR products have a higher level of danger, which means that they have to be transported in special vehicles that must also be driven by properly trained drivers and with a specific license. These transports are rarer than the standard ones and deliveries are usually longer, as there are incompatible products between them, which cannot therefore be transported together.
Shipping costs depend on the weight and/or volume of your order. Please refer to the tables below.

